REVO 3.3 MOTOR HOW TO
REVO 3.3 MOTOR INSTALL
REVO 3.3 MOTOR FULL

If you want only the best performance and budget is not an issue then Traxxas 5407 3.3 TRX Engine would be the best choice.

REVO 3.3 MOTOR INSTALL

To fulfill the potential performance of the Traxxas Revo monster truck, you will need an engine that can carry the load.Īlthough other engines might fail, you can install nitro engines from this list without any second thoughts. Yes, they have a shelf-life of 6 months if the temperature is around 30 degrees. The RC car that holds the fastest records uses brushless motors. You will need batteries for servos and receiver. Do not use nitro fuel if it seems watery or condensed. Yes, after a certain time they do go bad. The Traxxas X0-1 is the fastest car right now. They can last from 6 months to a year if they are preserved in the proper environment. That is why it is up to you to find the balance. So, you will have to take a hard look at the engine and see how much speed it can offer.Īlthough, going for more speed almost always sacrifices the torque. And, there is only a handful of RC cars and truck owners who are not into racing. Speed: Speed is an important factor if you intend to race. Having high torque will allow you to not only quick acceleration but also be comfortable running on rough terrain. The requirement goes up higher when you consider that this truck is designed for running off-road. Torque: As the Traxxas Revo has a weight of more than 10 lbs, you will need more power to run it. On the other hand, when running it on the plain road you can focus more on speed. Because higher torque will help to climb different slopes.

REVO 3.3 MOTOR FULL

Terrain: Before you choose an engine for Traxxas Revo, do a full assessment of the terrain you will mostly run.įor example, in case you wish to run the truck off-road then you will need better torque. So, do your research first if you wish to go for a big engine.

REVO 3.3 MOTOR HOW TO

The effect will be mostly negative if you don’t know how to tune your truck to take the advantage of the bigger engine. The build materials also play an important role when comes to lasting performance.Įngine Size: Traxxas Revo truck has enough space to accommodate bigger sizes. When choosing an engine for Revo, make sure it is made of a heat-conductive material like aluminum. Material: Engine material is the most important part of choosing a nitro, be it for an RC truck or a car.

Power generation is a bit low considering it is 2.7cc.

Traxxas 5407 3.3 TRX Engine – Best Overall Top 5 Nitro Engine for Revos Product Review: 1. That is why it is so important to balance out the fuel mixture by tuning the engine. On the other hand, you will get sluggish performance if you run the engine too rich. It is good to note that running an engine too lean will wear out the engine. Continue the process until you get the desired result. If acceleration seems sluggish or there is a lot of smoke then lean it by 1/16 of a turn. Let it sit idle for like 10 seconds and then do a hard acceleration. To tune low speed, get the engine running by doing a few high-speed passes. Continue the process until there is no improvement in performance. If so, then lean it by turning the needle 1/16 of a turn. Then run the RC car at full throttle and observe if the smoke is bluish. When tuning highspeed, at first make the fuel-rich to the full extent. To make the fuel mixture lean you will have to turn the needle clockwise. When tuning the engine you will have to either lean or richen their fuel flow. Doing so would ensure that the engine performs at the optimal level. In short, tuning an engine involves adjusting the carburetor to mix fuel and air in the right ratio.

18 RC Car Nitro Engine SH – Great Performance.

18 RC Car Nitro Engine SH 18 Nitro Engine – Runner Up.

Traxxas 5407 3.3 TRX Engine – Best Overall.

Our Recommendations On Best Nitro Engine for Revos:

Revo 3.3 motor